Basketball Courts · Schools · Parks · Backyards · Since 1972
Basketball court construction and installation from a crew that has been building sports courts since 1972. Post-tension concrete or standard base, acrylic color systems, precise striping, hoops, fencing, and lighting — from a regulation campus court to the half court in your backyard.
The Builder's Approach
A basketball court is the simplest court to underestimate. It looks like a slab, a hoop, and some paint — until the slab settles, water pools at the free-throw line, and cracks run through the key three winters in. The difference between a court that plays true for decades and one that becomes a skateboard hazard is entirely in what happens before and below the surface: drainage, base preparation, and concrete engineered for the job.
That's the part Barton Sports Construction has been doing since 1972. We build basketball courts on the same foundation discipline as our university tennis complexes and club pickleball facilities — site engineering first, post-tension or properly-reinforced concrete where it earns its keep, then acrylic color systems and striping laid out to the inch. Schools, parks, churches, clubs, and homeowners get the same slab science.
Basketball court installation is also where multi-sport thinking pays off: one well-built slab can carry basketball, pickleball lines, and hopscotch for the kids — and a court we build is a court we can resurface on an honest cycle instead of rebuilding.
Basketball At a Glance
Straight Numbers
These are the typical ranges we see — the honest answer for your site comes from a free assessment and a written line-item proposal. Site work and spec choices are the biggest variables.
Already have a slab that's seen better days? Basketball court resurfacing — crack treatment, color coat, and fresh striping — typically runs $4,000–$9,000 per full court. See the pricing guide or ask during your assessment.
Below the Paint
Our specialty since the PTI certified us to do it: a concrete slab with steel cables tensioned through it, actively squeezing the court together so cracks don't get a foothold. It costs more up front and is typically engineered for decades of structural life — the spec we recommend for campus, park, and club courts that can't afford downtime.
The workhorse: a properly engineered and reinforced concrete slab over a prepared base, finished with a multi-coat acrylic color system. Done with real site prep — grading, drainage, compaction — it delivers excellent play at a friendlier number, for backyards and budget-minded facilities alike.
Asphalt keeps the entry cost down where budgets are tight, and an existing sound slab — a driveway, an old court, a barn pad — can often be resurfaced or tiled into a legitimate playing surface rather than replaced. We'll tell you honestly whether what you have is worth building on.
Commercial & Institutional
Outdoor courts that survive PE classes, summer camps, and every recess in between. We build to the ruleset your program plays — NFHS high-school 84' × 50' with the correct arc, or NCAA regulation for college facilities — on bases specified for decades of daily use, scheduled around your academic calendar so the court is ready when the students are.
Public courts take the hardest use of any surface we build — open dawn to dusk, every season, no membership required. Municipal work gets our most durable specs: heavy-gauge fencing, vandal-resistant fixed hoop systems, high-traffic acrylic systems, and drainage engineered so the court reopens fast after Mid-South storms. We're comfortable in the bid process and the budget-year timeline.
Community courts earn their keep on weeknights and Saturdays — youth-group games, neighborhood leagues, family play. These builds usually want flexibility more than regulation: adjustable hoops for the kids, multi-sport striping so one slab serves basketball and pickleball, and lighting so the court works after supper. One pour, a whole community calendar.
Building more than one court — or pairing basketball with pickleball or tennis on the same site? Multi-court projects typically run 10–20% less per court, and we design the whole footprint — drainage, fencing runs, and shared lighting — as one system.
For Homeowners
The same crews that build campus courts build backyard ones — and no, your project is not too small. A backyard basketball court is one of the few home upgrades the whole family actually uses every week.
Most backyard basketball courts land between a 30' × 30' shooting pad and a full 47' × 50' half court — enough for three-point arcs, real key striping, and honest two-on-two. We plan the footprint around your yard: setbacks, drainage away from the house and the neighbors, sun angle, and where the ball naturally dies so it isn't in the flowerbed.
Residential basketball court installation comes with the decisions that make or break daily use: a quality adjustable hoop set in its own footing (not floating in the slab), acrylic color that stays cooler underfoot than raw concrete, optional LED lighting for after-dinner games, and rebound fencing where the yard needs it.
And because one slab can carry more than one game, most backyard courts we build get a second set of lines — a pickleball court shares the footprint beautifully, and the kids' four-square corner costs nothing but paint. One pour, every game in the driveway rotation.
Backyard Planning
How It Gets Built
Every court we build starts with the ground, not the hoop. We walk the site, shoot grades, and design drainage so water leaves the court instead of living under it — the single biggest factor in how long any slab lasts. You get a written line-item proposal before anything moves.
Excavation, compacted stone, and the slab your spec calls for — post-tension cables tensioned and locked, or engineered reinforced concrete placed and cured on schedule. Hoop footings are poured separately and correctly, so the goal never becomes the crack that ruins the court.
Multi-coat acrylic color system in your colors — court, key, and apron — then striping laid out to the inch: regulation key, college or high-school three-point arc, and any second sport's lines in a distinct color so both games read clean.
Then the finish work: hoops set plumb, fencing hung, lights aimed. Years later, when the surface has given what it has to give, resurfacing brings the court back for a fraction of what it cost to build — that's the maintenance cycle every court we pour is designed around.
Lines That Read Right
Striping is where a good slab becomes a real court, and it's fussier than it looks. The three-point arc alone has three common rulesets — high school at 19'9", college at 22'1¾", NBA at 23'9" — and the key, free-throw line, and restraining circle all have to agree with the arc you choose. We lay lines out to the ruleset you'll actually play, in colors that hold contrast as the surface weathers.
Multi-sport courts get one game in a primary color and the second in a deliberately quieter one, so players' eyes never argue about which line matters. A full pickleball layout (20' × 44') tucks neatly inside a half court with room to move; four square and hopscotch cost nothing but paint while the striping crew is already there.
Color matters below the lines too: lighter acrylic tones run cooler underfoot in a Mid-South July, and a two-tone court-and-apron scheme hides dust and pollen between rains. We'll bring the palette to the assessment.
Layout Cheat Sheet
After the Ribbon Cutting
The maintenance story for a well-built basketball court is refreshingly short. Keep drainage paths clear so water leaves the slab. Sweep grit off the acrylic before it grinds under sneakers. Watch for hairline cracks after hard winters and pooling that outlasts the morning — those are the surface asking for attention, not the structure failing.
On an honest cycle — typically every 4–8 years outdoors, depending on climate, construction quality, and how hard the court gets played — the surface earns a renewal: crack treatment, fresh acrylic color, and re-striping, typically $4,000–$9,000 per full court. That cycle is the whole reason base quality matters. A court on a sound, well-drained slab keeps costing resurfacing money; a court on a failing slab starts costing reconstruction money.
It's the same lifecycle discipline we apply to every surface we build — laid out in detail on our court resurfacing & repair page — and it's why we pour bases the way we do. The cheapest court over 30 years is the one built right in year one.
Questions Answered
Ready When You Are
Get a Free Site Assessment
We'll walk your site — backyard or campus — talk through footprint, base, hoops, lighting, and striping, and deliver a written line-item proposal. No cost, no pressure, and an honest recommendation either way.
Request Assessment →